ITK  4.9.0
Insight Segmentation and Registration Toolkit
Examples/RegistrationITKv3/ImageRegistrationHistogramPlotter.cxx
/*=========================================================================
*
* Copyright Insight Software Consortium
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0.txt
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*=========================================================================*/
// Software Guide : Begin TODO HACK FIXME CommandLineArgs
// INPUTS: {BrainT1SliceBorder20.png}
// INPUTS: {BrainProtonDensitySliceShifted13x17y.png}
// ARGUMENTS: RegisteredImage.png 0
// OUTPUTS: {JointEntropyHistogramPriorToRegistration.png}
// OUTPUTS: {JointEntropyHistogramAfterRegistration.png}
// ARGUMENTS: 128
// Software Guide : End TODO HACK FIXME CommandLineArgs
// Software Guide : BeginLatex
//
// When fine tuning the parameters of an image registration process it is not
// always clear what factor are having a larger impact on the behavior of the
// registration. Even plotting the values of the metric and the transform
// parameters may not provide a clear indication on the best way to modify the
// optimizer and metric parameters in order to improve the convergence rate
// and stability. In such circumstances it is useful to take a closer look at
// the internals of the components involved in computing the registration. One
// of the critical components is, of course, the image metric. This section
// illustrates a mechanism that can be used for monitoring the behavior of the
// Mutual Information metric by continuously looking at the joint histogram at
// regular intervals during the iterations of the optimizer.
//
// This particular example shows how to use the
// \doxygen{HistogramToEntropyImageFilter} class in order to get access to the
// joint histogram that is internally computed by the metric. This class
// represents the joint histogram as a $2D$ image and therefore can take
// advantage of the IO functionalities described in chapter~\ref{sec:IO}. The
// example registers two images using the gradient descent optimizer. The
// transform used here is a simple translation transform. The metric is a
// \doxygen{MutualInformationHistogramImageToImageMetric}.
//
// In the code below we create a helper class called the
// \code{HistogramWriter}. Its purpose is to save the joint histogram into a
// file using any of the file formats supported by ITK. This object is invoked
// after every iteration of the optimizer. The writer here saves the joint
// histogram into files with names: \code{JointHistogramXXX.mhd} where
// \code{XXX} is replaced with the iteration number. The output image contains
// the joint entropy histogram given by
// \begin{equation}
// f_{ij} = -p_{ij} \log_2 ( p_{ij} )
// \end{equation}
//
// where the indices $i$ and $j$ identify the location of a bin in the Joint
// Histogram of the two images and are in the ranges $i \in [0:N-1]$ and $j
// \in [0:M-1]$. The image $f$ representing the joint histogram has $N x M$
// pixels because the intensities of the Fixed image are quantized into $N$
// histogram bins and the intensities of the Moving image are quantized into
// $M$ histogram bins. The probability value $p_{ij}$ is computed from the
// frequency count of the histogram bins.
// \begin{equation}
// p_{ij} = \frac{q_{ij}}{\sum_{i=0}^{N-1} \sum_{j=0}^{M-1} q_{ij}}
// \end{equation}
// The value $q_{ij}$ is the frequency of a bin in the histogram and it is
// computed as the number of pixels where the Fixed image has intensities in
// the range of bin $i$ and the Moving image has intensities on the range of
// bin $j$. The value $p_{ij}$ is therefore the probability of the occurrence
// of the measurement vector centered in the bin ${ij}$. The filter produces
// an output image of pixel type \code{double}. For details on the use of
// Histograms in ITK please refer to section~\ref{sec:Histogram}.
//
// Depending on whether you want to see the joint histogram frequencies
// directly, or the joint probabilities, or log of joint probabilities, you
// may want to instantiate respectively any of the following classes
//
// \begin{itemize}
// \item \doxygen{HistogramToIntensityImageFilter}
// \item \doxygen{HistogramToProbabilityImageFilter}
// \item \doxygen{HistogramToLogProbabilityImageFilter}
// \end{itemize}
//
// \index{Histogram\-To\-Log\-Probability\-ImageFilter}
// \index{Histogram\-To\-Intensity\-Image\-Filter}
// \index{Histogram\-To\-Probability\-Image\-Filter}
//
// The use of all of these classes is very similar. Note that the log of the
// probability is equivalent to units of information, also known as
// \textbf{bits}, more details on this concept can be found in
// section~\ref{sec:ComputingImageEntropy}
//
// Software Guide : EndLatex
#include <iomanip>
// Software Guide : BeginLatex
//
// The header files of the classes featured in this example are included as a
// first step.
//
// \index{Histogram\-To\-Probability\-Image\-Filter!Header}
// \index{Mutual\-Information\-Histogram\-Image\-To\-Image\-Metric!Header}
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
// Software Guide : EndCodeSnippet
#include "itkCommand.h"
#include <stdio.h>
// Functor to rescale plot the histogram on a log scale and invert it.
template< class TInput >
class RescaleDynamicRangeFunctor
{
public:
typedef unsigned char OutputPixelType;
RescaleDynamicRangeFunctor() {};
~RescaleDynamicRangeFunctor() {};
inline OutputPixelType operator()( const TInput &A )
{
if( (A > 0.0) )
{
if( -(30.0 * std::log(A)) > 255 )
{
return static_cast<OutputPixelType>( 255 );
}
else
{
return itk::Math::Round<OutputPixelType>( -(30.0 * std::log(A)) );
}
}
else
{
return static_cast<OutputPixelType>(255);
}
}
};
// Class to write the joint histograms.
// Software : BeginLatex
//
// Here we will create a simple class to write the joint histograms. This
// class, that we arbitrarily name as \code{HistogramWriter}, uses internally
// the \doxygen{HistogramToEntropyImageFilter} class among others.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
namespace
{
class HistogramWriter
{
public:
typedef float InternalPixelType;
itkStaticConstMacro( Dimension, unsigned int, 2);
typedef itk::Image< InternalPixelType, Dimension > InternalImageType;
InternalImageType,
InternalImageType > MetricType;
// Software Guide : EndCodeSnippet
typedef MetricType::Pointer MetricPointer;
// Software Guide : BeginCodeSnippet
typedef MetricType::HistogramType HistogramType;
HistogramToEntropyImageFilterType;
typedef HistogramToEntropyImageFilterType::Pointer
HistogramToImageFilterPointer;
typedef HistogramToEntropyImageFilterType::OutputImageType OutputImageType;
typedef itk::ImageFileWriter< OutputImageType > HistogramFileWriterType;
typedef HistogramFileWriterType::Pointer HistogramFileWriterPointer;
// Software Guide : EndCodeSnippet
typedef HistogramToEntropyImageFilterType::OutputPixelType OutputPixelType;
HistogramWriter():
m_Metric(0)
{
// Software Guide : BeginLatex
//
// The \code{HistogramWriter} has a member variable \code{m\_Filter} of type
// HistogramToEntropyImageFilter.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
this->m_Filter = HistogramToEntropyImageFilterType::New();
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// It also has an ImageFileWriter that has been instantiated using the image
// type that is produced as output from the histogram to image filter. We
// connect the output of the filter as input to the writer.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
this->m_HistogramFileWriter = HistogramFileWriterType::New();
this->m_HistogramFileWriter->SetInput( this->m_Filter->GetOutput() );
// Software Guide : EndCodeSnippet
}
~HistogramWriter() { };
void SetMetric( MetricPointer metric )
{
this->m_Metric = metric;
}
MetricPointer GetMetric() const
{
return this->m_Metric;
}
void WriteHistogramFile( unsigned int iterationNumber )
{
std::string outputFileBase = "JointHistogram";
std::ostringstream outputFilename;
outputFilename << outputFileBase
<< "."
<< std::setfill('0') << std::setw(3) << iterationNumber
<< "."
<< "mhd";
m_HistogramFileWriter->SetFileName( outputFilename.str() );
this->m_Filter->SetInput( this->GetMetric()->GetHistogram() );
this->m_Filter->Modified();
try
{
m_Filter->Update();
}
catch( itk::ExceptionObject & err )
{
std::cerr << "ERROR: ExceptionObject caught !" << std::endl;
std::cerr << err << std::endl;
}
try
{
m_HistogramFileWriter->Update();
}
catch( itk::ExceptionObject & excp )
{
std::cerr << "Exception thrown " << excp << std::endl;
}
std::cout << "Joint Histogram file: ";
std::cout << outputFilename.str() << " written" << std::endl;
}
// Software Guide : BeginLatex
//
// The method of this class that is most relevant to our discussion is the
// one that writes the image into a file. In this method we assign the output
// histogram of the metric to the input of the histogram to image filter. In
// this way we construct an ITK $2D$ image where every pixel corresponds to
// one of the Bins of the joint histogram computed by the Metric.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
void WriteHistogramFile( std::string &outputFilename )
{
// Software Guide : EndCodeSnippet
// Software Guide : BeginCodeSnippet
this->m_Filter->SetInput( this->GetMetric()->GetHistogram() );
this->m_Filter->Modified();
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// The output of the filter is connected to a filter that will rescale the
// intensities in order to improve the visualization of the values. This is
// done because it is common to find histograms of medical images that have
// a minority of bins that are largely dominant. Visualizing such histogram
// in direct values is challenging because only the dominant bins tend to
// become visible.
//
// Software Guide : EndLatex
//Write the joint histogram as outputFilename. Also intensity window
//the image by lower and upper thresholds and rescale the image to
//8 bits.
typedef itk::Image< unsigned char, Dimension > RescaledOutputImageType;
typedef RescaleDynamicRangeFunctor<
OutputPixelType
> RescaleDynamicRangeFunctorType;
OutputImageType,
RescaledOutputImageType,
RescaleDynamicRangeFunctorType
> RescaleDynamicRangeFilterType;
RescaleDynamicRangeFilterType::Pointer rescaler =
RescaleDynamicRangeFilterType::New();
rescaler->SetInput( m_Filter->GetOutput() );
RescaledWriterType::Pointer rescaledWriter =
RescaledWriterType::New();
rescaledWriter->SetInput( rescaler->GetOutput() );
rescaledWriter->SetFileName( outputFilename );
try
{
m_Filter->Update();
}
catch( itk::ExceptionObject & err )
{
std::cerr << "ERROR: ExceptionObject caught !" << std::endl;
std::cerr << err << std::endl;
}
try
{
rescaledWriter->Update();
}
catch( itk::ExceptionObject & excp )
{
std::cerr << "Exception thrown " << excp << std::endl;
}
std::cout << "Joint Histogram file: " << outputFilename <<
" written" << std::endl;
}
// Software Guide : BeginLatex
//
// The following are the member variables of our \code{HistogramWriter} class.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
private:
MetricPointer m_Metric;
HistogramToImageFilterPointer m_Filter;
HistogramFileWriterPointer m_HistogramFileWriter;
// Software Guide : EndCodeSnippet
std::string m_OutputFile;
};
// Command - observer invoked after every iteration of the optimizer
class CommandIterationUpdate : public itk::Command
{
public:
typedef CommandIterationUpdate Self;
itkSimpleNewMacro( Self );
protected:
CommandIterationUpdate()
{
m_WriteHistogramsAfterEveryIteration = false;
}
public:
typedef const OptimizerType * OptimizerPointer;
void Execute(itk::Object *caller, const itk::EventObject & event)
{
Execute( (const itk::Object *)caller, event);
}
void Execute(const itk::Object * object, const itk::EventObject & event)
{
OptimizerPointer optimizer = static_cast< OptimizerPointer >( object );
if( ! itk::IterationEvent().CheckEvent( &event ) || optimizer == ITK_NULLPTR )
{
return;
}
std::cout << optimizer->GetCurrentIteration() << " ";
std::cout << optimizer->GetValue() << " ";
std::cout << optimizer->GetCurrentPosition() << std::endl;
// Write the joint histogram as a file JointHistogramXXX.mhd
// where \code{XXX} is the iteration number
//Write Joint Entropy Histogram prior to registration.
if( optimizer->GetCurrentIteration() == 0 )
{
// Software Guide : BeginLatex
//
// We invoke the histogram writer within the Command/Observer of the
// optimizer to write joint histograms after every iteration.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
m_JointHistogramWriter.WriteHistogramFile( m_InitialHistogramFile );
// Software Guide : EndCodeSnippet
}
if( m_WriteHistogramsAfterEveryIteration )
{
m_JointHistogramWriter.WriteHistogramFile(
optimizer->GetCurrentIteration() );
}
}
void SetWriteHistogramsAfterEveryIteration( bool value )
{
m_WriteHistogramsAfterEveryIteration = value;
}
void SetInitialHistogramFile( const char * filename )
{
m_InitialHistogramFile = filename;
}
HistogramWriter m_JointHistogramWriter;
private:
bool m_WriteHistogramsAfterEveryIteration;
std::string m_InitialHistogramFile;
};
} // end anonymous namespace
int main( int argc, char *argv[] )
{
if( argc < 8 )
{
std::cerr << "Missing Parameters " << std::endl;
std::cerr << "Usage: " << argv[0];
std::cerr << " fixedImageFile movingImageFile ";
std::cerr << "outputImagefile WriteJointHistogramsAfterEveryIteration ";
std::cerr << "JointHistogramPriorToRegistrationFile ";
std::cerr << "JointHistogramAfterRegistrationFile ";
std::cerr << "NumberOfHistogramBinsForWritingTheMutualInformationHistogramMetric";
std::cerr << std::endl;
return EXIT_FAILURE;
}
typedef unsigned char PixelType;
const unsigned int Dimension = 2;
typedef itk::Image< PixelType, Dimension > FixedImageType;
typedef itk::Image< PixelType, Dimension > MovingImageType;
typedef float InternalPixelType;
typedef itk::Image< InternalPixelType, Dimension > InternalImageType;
InternalImageType,
double > InterpolatorType;
InternalImageType,
InternalImageType > RegistrationType;
InternalImageType,
InternalImageType > MetricType;
// Software Guide : BeginLatex
//
// We instantiate an optimizer, interpolator and the registration method as
// shown in previous examples.
//
// Software Guide : EndLatex
TransformType::Pointer transform = TransformType::New();
OptimizerType::Pointer optimizer = OptimizerType::New();
InterpolatorType::Pointer interpolator = InterpolatorType::New();
RegistrationType::Pointer registration = RegistrationType::New();
MetricType::Pointer metric = MetricType::New();
registration->SetOptimizer( optimizer );
registration->SetTransform( transform );
registration->SetInterpolator( interpolator );
// Software Guide : BeginLatex
//
// The number of bins in the metric is set with the \code{SetHistogramSize()}
// method. This will determine the number of pixels along each dimension of
// the joint histogram. Note that in this case we arbitrarily decided to use
// the same number of bins for the intensities of the Fixed image and those
// of the Moving image. However, this does not have to be the case, we could
// have selected different numbers of bins for each image.
//
// \index{Mutual\-Information\-Histogram\-Image\-To\-Image\-Metric!SetHistogramSize()}
// \index{SetHistogramSize(),Mutual\-Information\-Histogram\-Image\-To\-Image\-Metric}
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
unsigned int numberOfHistogramBins = atoi( argv[7] );
MetricType::HistogramType::SizeType histogramSize;
histogramSize.SetSize(2);
histogramSize[0] = numberOfHistogramBins;
histogramSize[1] = numberOfHistogramBins;
metric->SetHistogramSize( histogramSize );
// Software Guide : EndCodeSnippet
const unsigned int numberOfParameters = transform->GetNumberOfParameters();
typedef MetricType::ScalesType ScalesType;
ScalesType scales( numberOfParameters );
scales.Fill( 1.0 );
metric->SetDerivativeStepLengthScales(scales);
CommandIterationUpdate::Pointer observer = CommandIterationUpdate::New();
// Set the metric for the joint histogram writer
observer->m_JointHistogramWriter.SetMetric( metric );
registration->SetMetric( metric );
typedef itk::ImageFileReader< FixedImageType > FixedImageReaderType;
typedef itk::ImageFileReader< MovingImageType > MovingImageReaderType;
FixedImageReaderType::Pointer fixedImageReader = FixedImageReaderType::New();
MovingImageReaderType::Pointer movingImageReader = MovingImageReaderType::New();
fixedImageReader->SetFileName( argv[1] );
movingImageReader->SetFileName( argv[2] );
FixedImageType,
InternalImageType
> FixedNormalizeFilterType;
MovingImageType,
InternalImageType
> MovingNormalizeFilterType;
FixedNormalizeFilterType::Pointer fixedNormalizer =
FixedNormalizeFilterType::New();
MovingNormalizeFilterType::Pointer movingNormalizer =
MovingNormalizeFilterType::New();
InternalImageType,
InternalImageType
> GaussianFilterType;
GaussianFilterType::Pointer fixedSmoother = GaussianFilterType::New();
GaussianFilterType::Pointer movingSmoother = GaussianFilterType::New();
fixedSmoother->SetVariance( 2.0 );
movingSmoother->SetVariance( 2.0 );
fixedNormalizer->SetInput( fixedImageReader->GetOutput() );
movingNormalizer->SetInput( movingImageReader->GetOutput() );
fixedSmoother->SetInput( fixedNormalizer->GetOutput() );
movingSmoother->SetInput( movingNormalizer->GetOutput() );
registration->SetFixedImage( fixedSmoother->GetOutput() );
registration->SetMovingImage( movingSmoother->GetOutput() );
try
{
fixedNormalizer->Update();
}
catch( itk::ExceptionObject & err )
{
std::cout << "ExceptionObject caught !" << std::endl;
std::cout << err << std::endl;
return EXIT_FAILURE;
}
registration->SetFixedImageRegion(
fixedNormalizer->GetOutput()->GetBufferedRegion() );
typedef RegistrationType::ParametersType ParametersType;
ParametersType initialParameters( transform->GetNumberOfParameters() );
initialParameters[0] = 0.0; // Initial offset in mm along X
initialParameters[1] = 0.0; // Initial offset in mm along Y
registration->SetInitialTransformParameters( initialParameters );
optimizer->SetMaximumStepLength( 4.00 );
optimizer->SetMinimumStepLength( 0.01 );
optimizer->SetRelaxationFactor( 0.90 );
optimizer->SetNumberOfIterations( 200 );
optimizer->MaximizeOn();
optimizer->AddObserver( itk::IterationEvent(), observer );
observer->SetInitialHistogramFile( argv[5] );
if( atoi(argv[4]) )
{
observer->SetWriteHistogramsAfterEveryIteration( true );
}
try
{
registration->Update();
std::cout << "Optimizer stop condition: "
<< registration->GetOptimizer()->GetStopConditionDescription()
<< std::endl;
}
catch( itk::ExceptionObject & err )
{
std::cout << "ExceptionObject caught !" << std::endl;
std::cout << err << std::endl;
return EXIT_FAILURE;
}
ParametersType finalParameters = registration->GetLastTransformParameters();
double TranslationAlongX = finalParameters[0];
double TranslationAlongY = finalParameters[1];
unsigned int numberOfIterations = optimizer->GetCurrentIteration();
double bestValue = optimizer->GetValue();
std::cout << "Result = " << std::endl;
std::cout << " Translation X = " << TranslationAlongX << std::endl;
std::cout << " Translation Y = " << TranslationAlongY << std::endl;
std::cout << " Iterations = " << numberOfIterations << std::endl;
std::cout << " Metric value = " << bestValue << std::endl;
//Write Joint Entropy Histogram after registration.
std::string histogramAfter(argv[6]);
try
{
observer->m_JointHistogramWriter.WriteHistogramFile( histogramAfter );
}
catch( itk::ExceptionObject & err )
{
std::cerr << "ERROR: ExceptionObject caught !" << std::endl;
std::cerr << err << std::endl;
return EXIT_FAILURE;
}
MovingImageType,
FixedImageType > ResampleFilterType;
TransformType::Pointer finalTransform = TransformType::New();
finalTransform->SetParameters( finalParameters );
finalTransform->SetFixedParameters( transform->GetFixedParameters() );
ResampleFilterType::Pointer resample = ResampleFilterType::New();
resample->SetTransform( finalTransform );
resample->SetInput( movingImageReader->GetOutput() );
FixedImageType::Pointer fixedImage = fixedImageReader->GetOutput();
resample->SetSize( fixedImage->GetLargestPossibleRegion().GetSize() );
resample->SetOutputOrigin( fixedImage->GetOrigin() );
resample->SetOutputSpacing( fixedImage->GetSpacing() );
resample->SetOutputDirection( fixedImage->GetDirection() );
resample->SetDefaultPixelValue( 100 );
typedef unsigned char OutputPixelType;
FixedImageType,
OutputImageType > CastFilterType;
WriterType::Pointer writer = WriterType::New();
CastFilterType::Pointer caster = CastFilterType::New();
writer->SetFileName( argv[3] );
caster->SetInput( resample->GetOutput() );
writer->SetInput( caster->GetOutput() );
try
{
writer->Update();
}
catch( itk::ExceptionObject & err )
{
std::cerr << "ERROR: ExceptionObject caught !" << std::endl;
std::cerr << err << std::endl;
}
return EXIT_SUCCESS;
}
// Software Guide : BeginLatex
//
// Mutual information attempts to re-group the joint entropy histograms into a
// more ``meaningful'' formation. An optimizer that minimizes the joint entropy
// seeks a transform that produces a small number of high value bins and a
// large majority of almost zero bins. Multi-modality registration seeks such a
// transform while also attempting to maximize the information contribution by
// the fixed and the moving images in the overall region of the metric.
//
// A T1 MRI (fixed image) and a proton density MRI (moving image) as shown in Figure
// \ref{fig:FixedMovingImageRegistration2}
// are provided as input to this example.
//
// Figure \ref{fig:JointEntropyHistograms} shows the joint histograms before and
// after registration.
// \begin{figure}
// \center
// \includegraphics[width=0.44\textwidth]{JointEntropyHistogramPriorToRegistration}
// \includegraphics[width=0.44\textwidth]{JointEntropyHistogramAfterRegistration}
// \itkcaption[Multi-modality joint histograms]{Joint entropy histograms before and
// after registration. The final transform was within half a pixel of true misalignment.}
// \label{fig:JointEntropyHistograms}
// \end{figure}
// Software Guide : EndLatex