ITK  4.8.0
Insight Segmentation and Registration Toolkit
Examples/Segmentation/LaplacianSegmentationLevelSetImageFilter.cxx
/*=========================================================================
*
* Copyright Insight Software Consortium
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0.txt
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*=========================================================================*/
// Software Guide : BeginCommandLineArgs
// INPUTS: {BrainProtonDensitySlice.png}
// INPUTS: {ThresholdSegmentationLevelSetImageFilterVentricle.png}
// OUTPUTS: {LaplacianSegmentationLevelSetImageFilterVentricle.png}
// ARGUMENTS: 10 2.0 1 127.5 15
// Software Guide : EndCommandLineArgs
// Software Guide : BeginLatex
//
// \index{itk::Laplacian\-Segmentation\-Level\-Set\-Image\-Filter}
//
// The \doxygen{LaplacianSegmentationLevelSetImageFilter} defines a speed
// term based on second derivative features in the image. The speed term is
// calculated as the Laplacian of the image values. The goal is to attract
// the evolving level set surface to local zero-crossings in the
// Laplacian image. Like \doxygen{CannySegmentationLevelSetImageFilter},
// this filter is more suitable for refining existing segmentations than as a
// stand-alone, region growing algorithm. It is possible to perform region
// growing segmentation, but be aware that the growing surface may tend to
// become ``stuck'' at local edges.
//
// The propagation (speed) term for the
// LaplacianSegmentationLevelSetImageFilter is constructed by applying the
// \doxygen{LaplacianImageFilter} to the input feature image. One nice
// property of using the Laplacian is that there are no free parameters in
// the calculation.
//
// LaplacianSegmentationLevelSetImageFilter expects two inputs. The
// first is an initial level set in the form of an \doxygen{Image}. The second
// input is the feature image $g$ from which the propagation term is calculated
// (see Equation~\ref{eqn:LevelSetEquation}). Because the filter performs a
// second derivative calculation, it is generally a good idea to do some
// preprocessing of the feature image to remove noise.
//
// Figure~\ref{fig:LaplacianSegmentationLevelSetImageFilterDiagram} shows how
// the image processing pipeline is constructed. We read two images: the
// image to segment and the image that contains the initial implicit surface.
// The goal is to refine the initial model from the second input to better
// match the structure represented by the initial implicit surface (a prior
// segmentation). The \code{feature} image is preprocessed using an
// anisotropic diffusion filter.
//
// \begin{figure} \center
// \includegraphics[width=0.9\textwidth]{LaplacianSegmentationLevelSetImageFilterCollaborationDiagram1}
// \itkcaption[LaplacianSegmentationLevelSetImageFilter collaboration
// diagram]{An image processing pipeline using
// LaplacianSegmentationLevelSetImageFilter for segmentation.}
// \label{fig:LaplacianSegmentationLevelSetImageFilterDiagram}
// \end{figure}
//
// Let's start by including the appropriate header files.
//
// Software Guide : EndLatex
#include "itkImage.h"
// Software Guide : BeginCodeSnippet
// Software Guide : EndCodeSnippet
int main( int argc, char *argv[] )
{
if( argc < 9 )
{
std::cerr << "Missing Parameters " << std::endl;
std::cerr << "Usage: " << argv[0];
std::cerr << " InputImage InitialModel OutputImage";
std::cerr << " DiffusionIterations ";
std::cerr << " DiffusionConductance ";
std::cerr << " PropagationWeight";
std::cerr << " InitialModelIsovalue";
std::cerr << " MaximumIterations" << std::endl;
return 1;
}
// Software Guide : BeginLatex
//
// We define the image type using a particular pixel type and
// dimension. In this case we will use 2D \code{float} images.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
typedef float InternalPixelType;
const unsigned int Dimension = 2;
typedef itk::Image< InternalPixelType, Dimension > InternalImageType;
// Software Guide : EndCodeSnippet
typedef unsigned char OutputPixelType;
InternalImageType,
OutputImageType > ThresholdingFilterType;
ThresholdingFilterType::Pointer thresholder = ThresholdingFilterType::New();
thresholder->SetUpperThreshold( 10.0 );
thresholder->SetLowerThreshold( 0.0 );
thresholder->SetOutsideValue( 0 );
thresholder->SetInsideValue( 255 );
ReaderType::Pointer reader1 = ReaderType::New();
ReaderType::Pointer reader2 = ReaderType::New();
WriterType::Pointer writer = WriterType::New();
reader1->SetFileName( argv[1] );
reader2->SetFileName( argv[2] );
writer->SetFileName( argv[3] );
// Software Guide : BeginLatex
//
// The input image will be processed with a few iterations of
// feature-preserving diffusion. We create a filter and set the
// parameters. The number of iterations and the conductance parameter are
// taken from the command line.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
InternalImageType> DiffusionFilterType;
DiffusionFilterType::Pointer diffusion = DiffusionFilterType::New();
diffusion->SetNumberOfIterations( atoi(argv[4]) );
diffusion->SetTimeStep(0.125);
diffusion->SetConductanceParameter( atof(argv[5]) );
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// The following lines define and instantiate a
// LaplacianSegmentationLevelSetImageFilter.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
InternalImageType > LaplacianSegmentationLevelSetImageFilterType;
LaplacianSegmentationLevelSetImageFilterType::Pointer laplacianSegmentation
= LaplacianSegmentationLevelSetImageFilterType::New();
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// As with the other ITK level set segmentation filters, the terms of the
// LaplacianSegmentationLevelSetImageFilter level set equation can be
// weighted by scalars. For this application we will modify the relative
// weight of the propagation term. The curvature term weight is set to its
// default of $1$. The advection term is not used in this filter.
//
// \index{itk::Laplacian\-Segmentation\-Level\-Set\-Image\-Filter!SetPropagationScaling()}
// \index{itk::Segmentation\-Level\-Set\-Image\-Filter!SetPropagationScaling()}
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
laplacianSegmentation->SetCurvatureScaling( 1.0 );
laplacianSegmentation->SetPropagationScaling( ::atof(argv[6]) );
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// The maximum number of iterations is set from the command line. It may
// not be desirable in some applications to run the filter to
// convergence. Only a few iterations may be required.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
laplacianSegmentation->SetMaximumRMSError( 0.002 );
laplacianSegmentation->SetNumberOfIterations( ::atoi(argv[8]) );
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// Finally, it is very important to specify the isovalue of the surface in
// the initial model input image. In a binary image, for example, the
// isosurface is found midway between the foreground and background values.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
laplacianSegmentation->SetIsoSurfaceValue( ::atof(argv[7]) );
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// The filters are now connected in a pipeline indicated in
// Figure~\ref{fig:LaplacianSegmentationLevelSetImageFilterDiagram}.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
diffusion->SetInput( reader1->GetOutput() );
laplacianSegmentation->SetInput( reader2->GetOutput() );
laplacianSegmentation->SetFeatureImage( diffusion->GetOutput() );
thresholder->SetInput( laplacianSegmentation->GetOutput() );
writer->SetInput( thresholder->GetOutput() );
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// Invoking the \code{Update()} method on the writer triggers the
// execution of the pipeline. As usual, the call is placed in a
// \code{try/catch} block to handle any exceptions that may be thrown.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
try
{
writer->Update();
}
catch( itk::ExceptionObject & excep )
{
std::cerr << "Exception caught !" << std::endl;
std::cerr << excep << std::endl;
}
// Software Guide : EndCodeSnippet
// Print out some useful information
std::cout << std::endl;
std::cout << "Max. no. iterations: " << laplacianSegmentation->GetNumberOfIterations() << std::endl;
std::cout << "Max. RMS error: " << laplacianSegmentation->GetMaximumRMSError() << std::endl;
std::cout << std::endl;
std::cout << "No. elpased iterations: " << laplacianSegmentation->GetElapsedIterations() << std::endl;
std::cout << "RMS change: " << laplacianSegmentation->GetRMSChange() << std::endl;
// Write out the speed (propagation) image for parameter tuning purposes.
speedWriter->SetInput( laplacianSegmentation->GetSpeedImage() );
speedWriter->SetFileName( "speedImage.mha" );
speedWriter->Update();
// Software Guide : BeginLatex
//
// We can use this filter to make some subtle refinements to the ventricle
// segmentation from the example using the filter
// \doxygen{ThresholdSegmentationLevelSetImageFilter}. This application
// was run using \code{Examples/Data/BrainProtonDensitySlice.png} and
// \code{Examples/Data/VentricleModel.png} as inputs. We used $10$
// iterations of the diffusion filter with a conductance of 2.0. The
// propagation scaling was set to $1.0$ and the filter was run until
// convergence. Compare the results in the rightmost images of
// Figure~\ref{fig:LaplacianSegmentationLevelSetImageFilter} with the
// ventricle segmentation from
// Figure~\ref{fig:ThresholdSegmentationLevelSetImageFilter} shown in the
// middle. Jagged edges are straightened and the small spur at the upper
// right-hand side of the mask has been removed.
//
// \begin{figure}
// \includegraphics[width=0.32\textwidth]{BrainProtonDensitySlice}
// \includegraphics[width=0.32\textwidth]{ThresholdSegmentationLevelSetImageFilterVentricle}
// \includegraphics[width=0.32\textwidth]{LaplacianSegmentationLevelSetImageFilterVentricle}
// \itkcaption[Segmentation results of LaplacianLevelSetImageFilter]{Results of
// applying LaplacianSegmentationLevelSetImageFilter to a prior ventricle
// segmentation. Shown from left to right are the original image, the
// prior segmentation of the ventricle from
// Figure~\ref{fig:ThresholdSegmentationLevelSetImageFilter}, and the refinement of the
// prior using LaplacianSegmentationLevelSetImageFilter.}
// \label{fig:LaplacianSegmentationLevelSetImageFilter}
// \end{figure}
//
// Software Guide : EndLatex
return 0;
}