ITK  4.6.0
Insight Segmentation and Registration Toolkit
Filtering/LaplacianRecursiveGaussianImageFilter1.cxx
/*=========================================================================
*
* Copyright Insight Software Consortium
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0.txt
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*=========================================================================*/
// Software Guide : BeginCommandLineArgs
// INPUTS: {BrainProtonDensitySlice.png}
// ARGUMENTS: LaplacianRecursiveGaussianImageFilterOutput3.mha 3
// OUTPUTS: {LaplacianRecursiveGaussianImageFilterOutput3.png}
// Software Guide : EndCommandLineArgs
// Software Guide : BeginCommandLineArgs
// INPUTS: {BrainProtonDensitySlice.png}
// ARGUMENTS: LaplacianRecursiveGaussianImageFilterOutput5.mha 5
// OUTPUTS: {LaplacianRecursiveGaussianImageFilterOutput5.png}
// Software Guide : EndCommandLineArgs
// Software Guide : BeginLatex
//
// This example illustrates how to use the
// \doxygen{RecursiveGaussianImageFilter} for computing the Laplacian of a 2D
// image.
//
// \index{itk::RecursiveGaussianImageFilter}
//
// Software Guide : EndLatex
#include "itkImage.h"
// Software Guide : BeginLatex
//
// The first step required to use this filter is to include its header file.
//
// \index{itk::RecursiveGaussianImageFilter!header}
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
// Software Guide : EndCodeSnippet
int main( int argc, char * argv[] )
{
if( argc < 4 )
{
std::cerr << "Usage: " << std::endl;
std::cerr << argv[0] << " inputImageFile outputImageFile sigma [RescaledOutputImageFile] " << std::endl;
return EXIT_FAILURE;
}
// Software Guide : BeginLatex
//
// Types should be selected on the desired input and output pixel types.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
typedef float InputPixelType;
typedef float OutputPixelType;
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// The input and output image types are instantiated using the pixel types.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
typedef itk::Image< InputPixelType, 2 > InputImageType;
typedef itk::Image< OutputPixelType, 2 > OutputImageType;
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// The filter type is now instantiated using both the input image and the
// output image types.
//
// \index{itk::RecursiveGaussianImageFilter!Instantiation}
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
InputImageType, OutputImageType > FilterType;
// Software Guide : EndCodeSnippet
ReaderType::Pointer reader = ReaderType::New();
reader->SetFileName( argv[1] );
// Software Guide : BeginLatex
//
// This filter applies the approximation of the convolution along a single
// dimension. It is therefore necessary to concatenate several of these filters
// to produce smoothing in all directions. In this example, we create a pair
// of filters since we are processing a $2D$ image. The filters are
// created by invoking the \code{New()} method and assigning the result to
// a \doxygen{SmartPointer}.
//
// We need two filters for computing the X component of the Laplacian and
// two other filters for computing the Y component.
//
// \index{itk::RecursiveGaussianImageFilter!New()}
// \index{itk::RecursiveGaussianImageFilter!Pointer}
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
FilterType::Pointer filterX1 = FilterType::New();
FilterType::Pointer filterY1 = FilterType::New();
FilterType::Pointer filterX2 = FilterType::New();
FilterType::Pointer filterY2 = FilterType::New();
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// Since each one of the newly created filters has the potential to perform
// filtering along any dimension, we have to restrict each one to a
// particular direction. This is done with the \code{SetDirection()} method.
//
// \index{RecursiveGaussianImageFilter!SetDirection()}
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
filterX1->SetDirection( 0 ); // 0 --> X direction
filterY1->SetDirection( 1 ); // 1 --> Y direction
filterX2->SetDirection( 0 ); // 0 --> X direction
filterY2->SetDirection( 1 ); // 1 --> Y direction
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// The \doxygen{RecursiveGaussianImageFilter} can approximate the
// convolution with the Gaussian or with its first and second
// derivatives. We select one of these options by using the
// \code{SetOrder()} method. Note that the argument is an \code{enum} whose
// values can be \code{ZeroOrder}, \code{FirstOrder} and
// \code{SecondOrder}. For example, to compute the $x$ partial derivative we
// should select \code{FirstOrder} for $x$ and \code{ZeroOrder} for
// $y$. Here we want only to smooth in $x$ and $y$, so we select
// \code{ZeroOrder} in both directions.
//
// \index{RecursiveGaussianImageFilter!SetOrder()}
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
filterX1->SetOrder( FilterType::ZeroOrder );
filterY1->SetOrder( FilterType::SecondOrder );
filterX2->SetOrder( FilterType::SecondOrder );
filterY2->SetOrder( FilterType::ZeroOrder );
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// There are two typical ways of normalizing Gaussians depending on their
// application. For scale-space analysis it is desirable to use a
// normalization that will preserve the maximum value of the input. This
// normalization is represented by the following equation.
//
// \begin{equation}
// \frac{ 1 }{ \sigma \sqrt{ 2 \pi } }
// \end{equation}
//
// In applications that use the Gaussian as a solution of the diffusion
// equation it is desirable to use a normalization that preserve the
// integral of the signal. This last approach can be seen as a conservation
// of mass principle. This is represented by the following equation.
//
// \begin{equation}
// \frac{ 1 }{ \sigma^2 \sqrt{ 2 \pi } }
// \end{equation}
//
// The \doxygen{RecursiveGaussianImageFilter} has a boolean flag that allows
// users to select between these two normalization options. Selection is
// done with the method \code{SetNormalizeAcrossScale()}. Enable this flag
// to analyzing an image across scale-space. In the current example, this
// setting has no impact because we are actually renormalizing the output to
// the dynamic range of the reader, so we simply disable the flag.
//
// \index{RecursiveGaussianImageFilter!SetNormalizeAcrossScale()}
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
const bool normalizeAcrossScale = false;
filterX1->SetNormalizeAcrossScale( normalizeAcrossScale );
filterY1->SetNormalizeAcrossScale( normalizeAcrossScale );
filterX2->SetNormalizeAcrossScale( normalizeAcrossScale );
filterY2->SetNormalizeAcrossScale( normalizeAcrossScale );
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// The input image can be obtained from the output of another
// filter. Here, an image reader is used as the source. The image is passed to
// the $x$ filter and then to the $y$ filter. The reason for keeping these
// two filters separate is that it is usual in scale-space applications to
// compute not only the smoothing but also combinations of derivatives at
// different orders and smoothing. Some factorization is possible when
// separate filters are used to generate the intermediate results. Here
// this capability is less interesting, though, since we only want to smooth
// the image in all directions.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
filterX1->SetInput( reader->GetOutput() );
filterY1->SetInput( filterX1->GetOutput() );
filterY2->SetInput( reader->GetOutput() );
filterX2->SetInput( filterY2->GetOutput() );
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// It is now time to select the $\sigma$ of the Gaussian used to smooth the
// data. Note that $\sigma$ must be passed to both filters and that sigma
// is considered to be in millimeters. That is, at the moment of applying
// the smoothing process, the filter will take into account the spacing
// values defined in the image.
//
// \index{itk::RecursiveGaussianImageFilter!SetSigma()}
// \index{SetSigma()!itk::RecursiveGaussianImageFilter}
//
// Software Guide : EndLatex
const double sigma = atof( argv[3] );
// Software Guide : BeginCodeSnippet
filterX1->SetSigma( sigma );
filterY1->SetSigma( sigma );
filterX2->SetSigma( sigma );
filterY2->SetSigma( sigma );
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// Finally the two components of the Laplacian should be added together. The
// \doxygen{AddImageFilter} is used for this purpose.
//
// \index{itk::AddImageFilter!Instantiation}
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
OutputImageType,
OutputImageType,
OutputImageType > AddFilterType;
AddFilterType::Pointer addFilter = AddFilterType::New();
addFilter->SetInput1( filterY1->GetOutput() );
addFilter->SetInput2( filterX2->GetOutput() );
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// The filters are triggered by invoking \code{Update()} on the Add filter
// at the end of the pipeline.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
try
{
addFilter->Update();
}
catch( itk::ExceptionObject & err )
{
std::cout << "ExceptionObject caught !" << std::endl;
std::cout << err << std::endl;
return EXIT_FAILURE;
}
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// The resulting image could be saved to a file using the
// \doxygen{ImageFileWriter} class.
//
// Software Guide : EndLatex
// Software Guide : BeginCodeSnippet
typedef float WritePixelType;
typedef itk::Image< WritePixelType, 2 > WriteImageType;
WriterType::Pointer writer = WriterType::New();
writer->SetInput( addFilter->GetOutput() );
writer->SetFileName( argv[2] );
writer->Update();
// Software Guide : EndCodeSnippet
// Software Guide : BeginLatex
//
// \begin{figure}
// \center
// \includegraphics[width=0.44\textwidth]{LaplacianRecursiveGaussianImageFilterOutput3}
// \includegraphics[width=0.44\textwidth]{LaplacianRecursiveGaussianImageFilterOutput5}
// \itkcaption[Output of the LaplacianRecursiveGaussianImageFilter.]{Effect of the
// LaplacianRecursiveGaussianImageFilter on a slice from a MRI proton density image
// of the brain.}
// \label{fig:LaplacianRecursiveGaussianImageFilterInputOutput}
// \end{figure}
//
// Figure~\ref{fig:LaplacianRecursiveGaussianImageFilterInputOutput} illustrates the
// effect of this filter on a MRI proton density image of the brain using
// $\sigma$ values of $3$ (left) and $5$ (right). The figure shows how the
// attenuation of noise can be regulated by selecting the appropriate
// standard deviation. This type of scale-tunable filter is suitable for
// performing scale-space analysis.
//
// Software Guide : EndLatex
// Rescale float outputs to png for inclusion in the Software guide
//
if (argc > 4)
{
typedef unsigned char CharPixelType;
typedef itk::Image<CharPixelType, 2> CharImageType;
RescaleFilterType;
RescaleFilterType::Pointer rescale = RescaleFilterType::New();
rescale->SetInput( addFilter->GetOutput() );
rescale->SetOutputMinimum( 0 );
rescale->SetOutputMaximum( 255 );
typedef itk::ImageFileWriter< CharImageType > CharWriterType;
CharWriterType::Pointer charWriter = CharWriterType::New();
charWriter->SetFileName( argv[4] );
charWriter->SetInput( rescale->GetOutput() );
charWriter->Update();
}
return EXIT_SUCCESS;
}